Fall Happiness 12x12 Plaque

Project Sheet: cd2979


Materials

 


Directions

  1. Paint the edges of the plaque and 1/2" in on all slats, using Toffee acrylic paint.
  2. Cut apart the "Colored Leaves" paper into three pieces, each measure 12" x 3.75".
  3. Making sure hangers are at the top on backside of plaque, use Mod Podge to adhere the pieces to the front of the plaque, smoothing out any air bubbles.
  4. Paint the edges of the scalloped frame with Blue Mist paint.  Use Mod Podge to adhere "Teal Gingham" paper to the frame.  Use a craft knife to cut off any excess paper from edges and opening. Sand edges to smooth them out.
  5. Adhere photo behind the frame, and use a Glossy Accents (or another strong glue) to adhere frame to the plaque.
  6. Use Mod Podge to adhere "Falling Leaves" (yellow print) paper to the wood maple leaf.  Cut around the edges using a craft knife and use sand edges to smooth out the edges.
  7. Use Glossy Accents to adhere leaf to the bottom left corner of the scalloped frame.
  8. Apply one of the wood words from the  Happiness sticker pack on the bottom, front of the frame.
  9. Display.