SOME ITEMS IN THIS PROJECT ARE NO LONGER AVAILABLE

Bewitching Wall Hanging

Project Sheet: cd1443

Bewitching Wall Hanging

Bewitching Wall Hanging

Project Sheet: cd1443

Materials

• 2 – MDF Witch legs
• MDF Bookmark
• My Mind’s Eye Paper: Frightful
     -Chandelier
     -Dots
• Black Acrylic Paint
• Mod Podge
• Black Glitter – Darice 1147-07
• 14ga Black Jewelry Wire
• Glossy Accents
• Foam Brush
• X-acto Knife
• Sandpaper
• Raffia

Directions

1. Paint the edges, shoes and back of each leg. You do not need paint where the paper is going to cover. Make sure one shoe is facing right
and the other left. Also paint the MDF bookmark edges.
2. Cut two pieces from dot(stripes) paper measuring 4”x12” with the stripes horizontally on the 4” width. Cut a piece measuring 1.75”x6.75” from the chandelier paper.
3. Adhere the Chandelier(chevron) paper to the book mark, chevron face up, using glossy accents. Let dry.
4. Apply Bewitching vinyl to the bookmark following instructions on package.
5. Using glossy accents, adhere the stripe paper face up to each leg, applying pressure
over the entire surface of paper to work out any air bubbles. Let dry.
6. Once dry, flip legs over and cut off extra paper from leg with X-acto knife.
7. Sand paper on edges of leg and book mark, dust off.
8. Dry brush around edges of leg with black paint.
9. Apply mod podge to shoes and sprinkle with black glitter to cover, shake off extra glitter over a scrap piece of paper to catch glitter to be reused. Do this to the edges of the bookmark as well. Let dry.
10. Drill a hole in the upper left corner of the left leg & upper right corner of the right leg.
11. Lay the legs side by side so shoes touch, apply glossy accents to the back of the bewitching plaque and adhere to the legs. Let Dry.
12. Attach 15” piece of wire through the holes in legs to create hanger.
13. Tie a raffia bow onto wire and hang.