SOME ITEMS IN THIS PROJECT ARE NO LONGER AVAILABLE

Family Fun Plaque 5x5

Project Sheet: CD2617
UPC #: 420004017604

Family Fun Plaque 5x5

Family Fun Plaque 5x5

Project Sheet: CD2617
UPC #: 420004017604

Materials

  • NST190  5x5 square plaque
  • Doodlebug paper (5384 trimming the tree)
  • Card stock in Caribbean Breeze blue 7-7119
  • Folk Art paint  480 Titanium White
  • Darice Snow Flake 2463-43
  • Glitter Tulle (ice blue) TUG0610-05C
  • Mod Podge
  • E6000
  • Paper cutter or craft knife with straight edge
  • Sponge foam brush
  • Paper hole punch medium and standard size or craft knife

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Directions

1. Paint edges of 5x5 plaque with Titanium White paint, using sponge foam brush. May need second coat. Let dry.

2. Cut Doodlebug paper (5384 trimming the tree), measure top surface of plaque. about 5 1/4in x 5 1/4in. Cut to fit surface.

3. Lay in place and mark the holes. Use a medium hole punch or craft knife to cut holes as marked.

4. Using sponge foam brush apply a coat of mod podge to top surface of square plaque. Line up holes and lay flat and smooth. Let dry.

5. Cut photo to size approximate. 4in wide and 4 1/4in high.

6. Cut Caribbean Breeze card stock 4 1/4in wide and 4 1/2in high, slightly larger than photo.

7. Use mod podge with sponge foam brush and apply coat to back of photo. Then center on top of Caribbean Breeze card stock cut to size.

8. Put coat of mod podge on back side of Caribbean Breeze card stock with photo, place in center of 5x5 plaque, lay flat and smooth.

9. Cut approximately 16 inch length  of Glitter Tulle (ice blue), thread the ends into each hole from the back of plaque. Tie into a small bow.

10. Place Darice Snow Flake in left corner, glue into place with E6000.