SOME ITEMS IN THIS PROJECT ARE NO LONGER AVAILABLE

Burlap Coffee Bean Sack Board

Project Sheet: cd2078
UPC #: 420005002012

Burlap Coffee Bean Sack Board

Burlap Coffee Bean Sack Board

Project Sheet: cd2078
UPC #: 420005002012

Materials

• Burlap Coffee Bean Sack
• 17 x 23 Framed Cork Board
• 2 pkg Upholstery Tacks (approx. 38)
• Hammer
• Staple gun

Directions

1. Remove hardware from cork board. Set aside.
2. Cut the burlap sack down the sides and bottom.
3. Choose the front or back of burlap sack to use on the cork board, place it face down on the floor.
4. Center board face down on top of the burlap. Fold the top of the burlap over to the back of the board and staple in place along the back of the frame. Because the burlap is such a loose weave, the more staples, the better it will hold in place.
5. As you continue to staple, be sure to check the front side, being sure that the printing on the front of the burlap is centered how you prefer.
6. Pull burlap snuggly to remove any puckering on the front. Repeat step five along the bottom first then the sides, leaving the corners for last.
7. Fold burlap flat at corners and staple in place.
8. Flip board over. Install tacks using hammer. Start by placing one in each corner. Work around the board, spacing them two inches apart; using 12 along the sides and filling in the top and bottom with 7 on each end.
9. Reattach the hardware to the back of the board or other hanging devices of your choice.
10. Hang and display your favorite photos, notes and messages!