Hold On Plaque

Project Sheet: cd482

Hold On Plaque

Hold On Plaque

Project Sheet: cd482

Materials

• Plaque

• 8"x10" photo (plaque is actually 10.5" so a picture modified on home computer and printed works well)

• Vinyl saying

• Ultra Seal

• Envirotex

• Masking tape

 

Directions

1. Align the picture with the plaque. Face picture front side down, place plaque on top and trace the design of plaque on to the back of the picture.

2. Cut picture to match plaque.

3. Use Ultra Seal to apply picture to front of plaque. Allow to dry.

4. Once dry, apply vinyl saying over the photo.

5. Next cover the picture with a heavy coat of Ultra Seal. Allow to dry and repeat 2 more times.

6. Once 3 coats of Ultra Seal have been applied and allowed to dry, you will want to apply masking tape to the back of the plaque around the edges. Use a exacto knife to cut off any excess tape. Tape should not go past the edge of the plaque.

7. Use Envirotex to cover the plaque by following the directions on the box. Allow to dry over night (possibly longer).

8. Remove masking tape.