Home Sweet Home Pallet

Project Sheet: cd2914
UPC #: 420004018892

Home Sweet Home Pallet

Home Sweet Home Pallet

Project Sheet: cd2914
UPC #: 420004018892

Materials

  • Pallet Plaque (Natural) - PAC/4
  • Vinyl (Home Sweet Home w/Garland) - Decorating Your Life
  • Acrylic Paint (Old Ivy, Warm White) - FolkArt
  • Painters Tape/Washi Tape
  • Foam Brush
  • Sandpaper
  • Craft Knife
  • Scissors

 

Directions

  1. Lightly sand the surface of the pallet plaque, wipe off dust.
  2. Cut apart the vinyl so you have four separate pieces,  2-garland pieces, word Home and Sweet Home.
  3. With the slats going horizontal, place painters tape/washi tape 2-3/8" down from the top and up from the bottom. check to make sure the garland will fit in the area above or below the tape just by laying it on there, do not apply. If it doesn't fit reapply the tape to fit the garland vinyl.
  4. Paint the area above the tape on the top and below the tape on the bottom, Old Ivy.  Apply a second coat if needed, letting dry between coats. Remove tape.
  5. Once dry, following instructions on vinyl packaging to apply the garland vinyl to the top and bottom of the pallet over the Old Ivy sections, centering it.
  6. Making sure the hangers are at the top on backside, apply the word Home on the natural wood below the top Old Ivy Section.
  7. Paint the front of the plaque Warm White, painting over vinyl and Old Ivy. Apply two to three coats, letting dry between coats.
  8. Once dry, remove the vinyl using a craft knife. Lightly sand the front of the pallet board and edges, wiping off dust.
  9. Apply Sweet Home vinyl below the word home, following instructions on vinyl packaging.
  10. Dry brush Warm White, using very little paint, over the Sweet Home vinyl. Let Dry.
  11. Display.