Gather Wreath Tile Board

Project Sheet: cd2925
UPC #: 420004019004

Gather Wreath Tile Board

Gather Wreath Tile Board

Project Sheet: cd2925
UPC #: 420004019004

Materials

  • Wood Tile Board w/ 9 Tiles
  • Wood Tint (Walnut) - FolkArt
  • Paper (Keep Life Happy) - Carta Bella
  • Distress Mini Ink Pad (Black Soot) - Ranger
  • Foam Stamp Set
  • Gold Thumb Tack
  • Grapevine Wreath 8"
  • Eucalyptus Bush 10"
  • Burlap Ribbon
  • Scor-Tape 1/4"
  • Bristle Brush
  • Paper Towel
  • Scissors
  • Paper Trimmer
  • Sandpaper

Directions

  1. Remove wood tiles from tile board, discard or save for another project.
  2. Wood Tint the Wood Tile Board Frame removing excess with a paper towel. Let dry.
  3. Trim Keep Life Happy paper to fit into the tile board frame.
  4. With the hanger at the top on backside of tile board, adhere paper using Scor-Tape along each side on the back of the paper with white wood side up, stripes going horizontally.
  5. Using the foam stamps and Distress Ink Pad, stamp the word GATHER about an inch from bottom starting with the H in the center and working your way out on each side. Let ink dry.  If you get extra ink on your paper, like I did when making this sample,  from the foam around your stamp, use sand paper to sand those areas and then lightly sand over the top of the letters for a little more of a distressed look.  TIP: You could also practice on scrap paper first and/or lightly stamp onto scrap paper first to blot off some of the color before stamping onto background paper so ink isn't so bold.
  6. Cut Eucalyptus from main stem and tuck pieces into the grapevine wreath working your way around the wreath.
  7. Use a piece of burlap ribbon to wrap around the wreath, bringing the ends up to the top of the frame and securing with a gold tack. Wreath should hang right above the stamped word. Trim excess ribbon if needed.
  8. Display.