Merry Christmas Rustic Pallet

Project Sheet: cd2847
UPC #: 420004018236

Merry Christmas Rustic Pallet

Merry Christmas Rustic Pallet

Project Sheet: cd2847
UPC #: 420004018236

Materials

  • Rustic Pallet - GSG/20
  • Chalk Paint (Cottage White) - FolkArt
  • Vinyl (Merry Christmas) - Decorating Your Life
  • Carta Bella: Christmas Papers
    • Festive Ornaments
    • Winter Floral
    • 4x4 Journaling Card
  • Carousel Clips - Tim Holtz
  • Upholstery Tacks (Black) - Dritz
  • Scor-Tape 1/4"
  • Bristle Brush 2"
  • Paper Trimmer
  • Hammer/Rubber Mallet
  • Photos/Christmas Cards

Directions

  1. Paint the Rustic Pallet Cottage White. Let dry. 
  2. From Winter Floral paper, cut two strips measuring 3.5"x12". From Festive Ornaments Paper cut four strips that measure 3/4"x12".
  3. Using Scor-Tape, adhere the Festive Ornaments (black plaid) strips to the top and bottom of the Winter Floral (Poinsettia), creating a border of black plaid that is approximately 1/4" on the top and bottom.
  4. Apply Scor-tape tot the back of the bordered paper strips, also applying it to the center to hold the two 12" strips together without exposing adhesive yet.
  5. Following instructions on vinyl packaging, apply vinyl saying to the 24" paper piece, centering it.
  6. Position pallet on work surface so slats are vertical and the hangers are at the top on backside.
  7. Exposing adhesive on the 24" paper strip, apply paper strip to toward the top of the pallet.
  8. Push/hammer in upholstery tacks into each corner on the left and right side of the paper strip. If you are using a metal hammer, place tape of the head to prevent scratching the tack.
  9. Push/hammer in tacks below the paper strip on pallet, not hammering all the way in.  See photo for placement.
  10. Hang clips from each tack.
  11. Hang photos/Christmas cards from the clips.
  12. Display.