Shine Easel

Project Sheet: cd1744

Shine Easel

Shine Easel

Project Sheet: cd1744

Materials

• Double Sided Easel Frame CAL/6
• Metallic Paint-Americana (Shimmering Silver)
• Metallic Paint-FolkArt (Metallic Blue Topaz)
• Vinyl-Shine – Decorating Your Life
• Magic Seven Color Changing Lights -Silver Cord (20 Bulb Set)
• Paint Brush
• Cropadile-We R MemoryKeepers

Directions

1. Cut the twine from the bottom of the frame, and remove.
2. Remove the hardware, backing and glass from each side from the frame. Set aside.
3. Paint the surface of the frame using the Metallic Shimmering Silver Acrylic Paint. Let dry.
4. Paint both sides of the backing piece using the Metallic Blue Topaz Acrylic Paint. Let dry.
5. From the back side of one of the back pieces, mark where you would like to punch the holes using the Cropadile. I measured in one inch from each side, then marked in one inch increments. Punch holes using the Cropadile.
6. Apply the vinyl to the front of this wood piece according to the instructions with the vinyl.
8. Place the lights through the holes from the back side. Insert batteries into the battery pack. Adhere to the back center of this piece using any washi tape. Insert into one side of the frame.
9. In the opposite frame, insert glass, a 4x6 photo and backing.
10. Put the hardware back on the frame.
11. Turn lights on and display.