SOME ITEMS IN THIS PROJECT ARE NO LONGER AVAILABLE

Stenciled Tree Pallet

Project Sheet: cd2827
UPC #: 420004018038

Stenciled Tree Pallet

Stenciled Tree Pallet

Project Sheet: cd2827
UPC #: 420004018038

Materials

  • 12" Pallet - NST/540XL
  • 12" Stencil (Word Christmas Tree) - Clear Scraps
  • Acrylic Paint (Clover) - FolkArt
  • Glitter (Gold) - Darice
  • Paper (Perfect Christmas: Holiday Ornaments) - Echo Park
  • Glossy Accents - Ranger
  • Ultra Fine Permanent Marker - Sharpie
  • Stencil Brush
  • Paper Trimmer
  • Sandpaper
  • Ruler
  • Tape

Directions

  1. With jute hanger at the top, place stencil on pallet using tape on the edges to hold in place. Tape off the star and the trunk.
  2. Using stencil brush and very little Clover paint, Stencil words onto the pallet in a pouncing motion.
  3. Remove tape from the star and trunk. Use Sharpie marker to outline the trunk and star using small dashes. Remove stencil and remaining tape.
  4. Outline the star shape and fill it in using Glossy Accents. While it is still wet apply gold glitter over the top shaking off excess. Let dry.
  5. Cut four paper strips to fit each side of the pallet. The sides may differ slightly so measure each side before cutting.
  6. Adhere paper (green buffalo check side up) to the sides of the pallet smoothing out any air bubbles.
  7. Lightly sand over the stencil words on the pallet and edges so paper is flush with the wood.
  8. Display.