SOME ITEMS IN THIS PROJECT ARE NO LONGER AVAILABLE
Let it Shine Frame
Project Sheet: cd2917
UPC #: 420004018922
Materials
- Wood Tile Board w/ 9 Tiles
- Acrylic Paint (Thicket, Pure Gold Metallic) - FolkArt
- Vinyl (Let Your Light Shine) - Decorating Your Life
- Paper (Fireflies in the Garden) - One Canoe Two
- Moon Lights (Warm White) - Darice
- Bristle Brush
- Foam Tape - 3L
- Paper Trimmer
- Craft Knife
- Scissors
Directions
- Remove tiles from frame discard or use for another project.
- Paint the entire wood tile board frame Thicket, apply a second coat if needing letting dry between coats.
- Dry brush wood frame, using very little Pure Gold paint.
- Make sure hanger on backside is at top. Use craft knife to cut a little slot in a bottom corner to thread the lights through from backside.
- Apply Foam Tape all the way around the inside outer edges of frame.
- Trim paper as needed to fit into the frame. Apply vinyl to the center toward the top, following instructions on vinyl packaging.
- Thread lights through the slot in wood frame, attach the lights to the backside of the Firefly paper using pieces of foam tape.
- Place paper into the frame, pressing it around the edges to adhere to foam tape from step 5.
- Using Foam Tape, secure battery pack on backside of frame, so the on/off switch faces is against the edge to turn it on/off easily.
- Display.