Time Spent with Family Pallet

Project Sheet: cd2987
UPC #: 420004019585

Time Spent with Family Pallet

Time Spent with Family Pallet

Project Sheet: cd2987
UPC #: 420004019585

Materials

  • Rustic Pallet - GSG/20
  • 8x10 Frame (Whitewash) - Darice
  • Vinyl (Time Spent with Family) - Decorating Your Life
  • Chalk Paint (Sage) - FolkArt
  • MDF Family Cut Out - Diverse Woodworking
  • Cotton Pick - SPC
  • Burlap Ribbon
  • E6000 Adhesive
  • Velcro Squares
  • Paint Brush
  • Palm Sander
  • Scissors
  • Small Phillips Screwdriver
  • 8x10 Photo

Directions

  1. Remove hanging hardware and stickers from the backside of pallet, this will become the front. Install hangers on the opposite side for hanging.
  2. Dry brush the pallet using very little Sage Chalk Paint. Let dry.
  3. Paint the Family cut out Sage. Let dry.
  4. Remove easel piece on frame and insert photo, replacing the backing without the easel piece attached.
  5. Lightly sand the pallet, especially the second and ninth slat where vinyl will be applied.  Wipe off dust. Also, sand edges of the word family.
  6. Lay the word "FAMILY" on the bottom edge of frame, make note of where the letters "F" and "L" touch the frame and apply E6000 to those spots. Place the word onto the frame and prop something on top of it or under it so it dries as flat as possible against the frame. Let dry for a couple of hours at least,  if not over night.
  7. Cut the vinyl apart and apply, "Time spent with" on the second slat against left edge and "worth every second" on the ninth edge against the right edge. Refer to vinyl packing for application and photo for reference of placement.
  8. Wrap burlap ribbon around the pallet above"with every second" vinyl tying into a double knot.
  9. Incorporate the Cotton Pick into the burlap knot, securing it with E6000. Let dry.
  10. Using Velcro squares on the back side of the frame, adhere the family frame to the pallet, centering it between the top vinyl and burlap ribbon.  Family should overlap the ribbon.
  11. Display.